Browse by Journal

Evans, M; Farrell, P; Zewein, W and Mashali, A (2021) Analysis framework for the interactions between building information modelling (BIM) and lean construction on construction mega-projects. Journal of Engineering, Design and Technology, 19(6), pp. 1451-1471. ISSN 1726-0531

De-Graft, O-M; Debrah, C; Oduro-Ofori, E; Edwards, D J and Prince, A-A (2021) Attributable indicators for measuring the level of greenness of cities in developing countries: Lessons from Ghana. Journal of Engineering, Design and Technology, 19(3), pp. 625-646. ISSN 1726-0531

Jafari, K G; Nozhat Sadat Ghazi, S and Noorzai, E (2021) BIM-based integrated solution for analysis and management of mismatches during construction. Journal of Engineering, Design and Technology, 19(1), pp. 81-102. ISSN 1726-0531

Hayette, F; Abadou, Y and Ghrieb, A (2021) Bio-waste influence on air lime mortar performance corrosion: optimization using the surface response method. Journal of Engineering, Design and Technology, 19(5), pp. 1124-1137. ISSN 1726-0531

Titus, E K; Aigbavboa, C O and Wellington Didibhuku, T (2021) Clusters of key barriers to life cycle assessment adoption in the South African construction industry: Perspectives of stakeholders. Journal of Engineering, Design and Technology, 19(4), pp. 888-903. ISSN 1726-0531

Falaq Assad, N; Edwards, D J; Shelbourn, M; Martek, I; Wellington Didibhuku Didibhuku, T and El-Gohary, H (2021) Comparison of modular and traditional UK housing construction: A bibliometric analysis. Journal of Engineering, Design and Technology, 19(1), pp. 164-186. ISSN 1726-0531

Velasco-Aquino, A A; Jose Adan, E-M; Perez-Sanchez, J F; Zuñiga-Leal, C; Palacio-Perez, A and Suarez-Dominguez, E J (2021) Compressed earth block reinforced with coconut fibers and stabilized with aloe vera and lime. Journal of Engineering, Design and Technology, 19(3), pp. 795-807. ISSN 1726-0531

Abdolrezaei, H; Siahkali, H and Olamaei, J (2021) Coordination of similar days and multi-objective posterior process to predict energy of transmission substation. Journal of Engineering, Design and Technology, 19(6), pp. 1556-1585. ISSN 1726-0531

Eken, T Y; Sarioglu, C and Kucuk, I (2021) Corrosion behaviour of twin-roll cast 8006 aluminium alloy foil with different thicknesses for the food packaging industry. Journal of Engineering, Design and Technology, 19(6), pp. 1421-1432. ISSN 1726-0531

Adamtey, S (2021) Cost and time performance analysis of progressive design-build projects. Journal of Engineering, Design and Technology, 19(3), pp. 686-697. ISSN 1726-0531

Abediniangerabi, B; Shahandashti, M and Makhmalbaf, A (2021) Coupled transient heat and moisture transfer investigation of facade panel connections. Journal of Engineering, Design and Technology, 19(3), pp. 758-777. ISSN 1726-0531

Tijani, B; Jin, X and Osei-Kyei, R (2021) Critical analysis of mental health research among construction project professionals. Journal of Engineering, Design and Technology, 19(2), pp. 467-496. ISSN 1726-0531

Nyawera, J X and Theodore Conrad, H (2021) Critical drivers towards generative process health and safety culture. Journal of Engineering, Design and Technology, 19(2), pp. 385-411. ISSN 1726-0531

Evans, M; Farrell, P; Mashali, A and Zewein, W (2021) Critical success factors for adopting building information modelling (BIM) and lean construction practices on construction mega-projects: A Delphi survey. Journal of Engineering, Design and Technology, 19(2), pp. 537-556. ISSN 1726-0531

Nabizadeh, M; Khalilzadeh, M; Ebrahimnejad, S and Ershadi, M J (2021) Developing a fuzzy goal programming model for health, safety and environment risks based on hybrid fuzzy FMEA-vikor method. Journal of Engineering, Design and Technology, 19(2), pp. 317-338. ISSN 1726-0531

Hongsheng, T; Changwen, H and Chenye, G (2021) Development of a rotatable similar simulation experimental system for steep coal seam mining. Journal of Engineering, Design and Technology, 19(6), pp. 1373-1386. ISSN 1726-0531

Amin, F; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Economic optimization of heat exchanger networks based on geometric parameters using hybrid genetic-particle swarm algorithm technique. Journal of Engineering, Design and Technology, 19(4), pp. 989-1015. ISSN 1726-0531

Ostakh, O; Uzyakova, E; Grechishcheva, N and Kusheeva, V (2021) Ecotoxicological assessment of soil-like mixtures made of drill cuttings. Journal of Engineering, Design and Technology, 19(6), pp. 1433-1450. ISSN 1726-0531

Ayed Eid, A (2021) Effect of the transversal-spacing of stirrup-legs on the behavior and strength of shallow concealed RC beams. Journal of Engineering, Design and Technology, 19(4), pp. 932-942. ISSN 1726-0531

Sharma, R (2021) Effect of wastes and admixtures on compressive strength of concrete. Journal of Engineering, Design and Technology, 19(1), pp. 219-244. ISSN 1726-0531

Magoda, C M; Gryzagoridis, J and Kant, K (2021) Effective heat conductivity of honeycomb (porous) composite panel. Journal of Engineering, Design and Technology, 19(4), pp. 876-887. ISSN 1726-0531

Mhundwa, R and Simon, M (2021) Electrical energy prediction using a surface fitting model for an on-farm direct expansion bulk milk cooler (dxbmc) in South Africa. Journal of Engineering, Design and Technology, 19(3), pp. 778-794. ISSN 1726-0531

Wang, Y; Lin, M; Xu, K; Zhang, S and Ma, H (2021) Energy consumption analysis of glass house using electrochromic window in the subtropical region. Journal of Engineering, Design and Technology, 19(1), pp. 203-218. ISSN 1726-0531

Hosseini, M R; Edwards, D J; Singh, T; Martek, I and Amos, D (2021) Engineering project networks: Providing "sustainable work systems" for construction knowledge workers. Journal of Engineering, Design and Technology, 19(1), pp. 21-40. ISSN 1726-0531

Agyekum, K; Adinyira, E and Amudjie, J (2021) Ethical misconducts within the invitation to tender and tender evaluation and award stages of construction contracts in Ghana. Journal of Engineering, Design and Technology, 19(5), pp. 1101-1123. ISSN 1726-0531

Nwaogu, J M and Chan, A P C (2021) Evaluation of multi-level intervention strategies for a psychologically healthy construction workplace in Nigeria. Journal of Engineering, Design and Technology, 19(2), pp. 509-536. ISSN 1726-0531

Ifeoluwa Benjamin, O; Ogunleye, M B and Abiodun Kolawole, O (2021) Evaluation of the critical success factors for sustainable housing delivery: Analytic hierarchy process approach. Journal of Engineering, Design and Technology, 19(5), pp. 1044-1062. ISSN 1726-0531

De-Graft, O-M; Kukah, A S; Boateng, F; Asumadu, G and Edwards, D J (2021) Exploring strategies to reduce moral hazard and adverse selection of Ghanaian public-private partnership (PPP) construction projects. Journal of Engineering, Design and Technology, 19(2), pp. 358-372. ISSN 1726-0531

Tai, S; Zhang, Y and Li, T (2021) Factors affecting BIM application in China: A social network model. Journal of Engineering, Design and Technology, 19(2), pp. 373-384. ISSN 1726-0531

Hasheminasab, S and Kashi, E (2021) Finite element analysis of ports pavement under container loading. Journal of Engineering, Design and Technology, 19(2), pp. 497-508. ISSN 1726-0531

Aghimien, E I; Aghimien, L M; Petinrin, O O and Aghimien, D O (2021) High-performance computing for computational modelling in built environment-related studies: a scientometric review. Journal of Engineering, Design and Technology, 19(5), pp. 1138-1157. ISSN 1726-0531

Prachi Vinod, I; Gangadhar, M and Deepak, M D (2021) Identifying the performance areas affecting the project performance for Indian construction projects. Journal of Engineering, Design and Technology, 19(1), pp. 1-20. ISSN 1726-0531

Muleya, F; Mulenga, B; Sambo Lyson, Z; Nwaubani, S; Chipozya Kosta, T and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Pieters, W D and Tzoneva, R (2021) Investigation of an iec 61850 standard-based process bus implementation of a protection and control scheme for parallelly connected transformers. Journal of Engineering, Design and Technology, 19(4), pp. 850-875. ISSN 1726-0531

Somani, N; Singh, N and Gupta, N K (2021) Joining and characterization of ss-430 using microwave hybrid heating technique. Journal of Engineering, Design and Technology, 19(6), pp. 1344-1357. ISSN 1726-0531

Mahmud, A T; Ogunlana, S O and Hong, W T (2021) Key driving factors of cost overrun in highway infrastructure projects in Nigeria: A context-based perspective. Journal of Engineering, Design and Technology, 19(6), pp. 1530-1555. ISSN 1726-0531

Irewolede Aina, I; Godwin Iroroakpo, I and Michael Gbolagade, O (2021) Key training practice indicators for optimal site supervisors' utilisation in construction firms. Journal of Engineering, Design and Technology, 19(1), pp. 149-163. ISSN 1726-0531

De-Graft, O-M; Adjei, T K; David Mensah, S; Edwards, D J and Hosseini, R M (2021) Mainstreaming sustainable development goals in Ghana's energy sector within the framework of public-private partnerships: Challenges, opportunities and strategies. Journal of Engineering, Design and Technology, 19(3), pp. 605-624. ISSN 1726-0531

Perera, B A K S; Sirimewan, D C and Senadeera, A D (2021) Management of variations in the public-sector building construction projects in Sri Lanka. Journal of Engineering, Design and Technology, 19(6), pp. 1601-1619. ISSN 1726-0531

Pandian, A N and Palanivelu, A (2021) Metaheuristic optimization based placement of svcs with multiple objectives. Journal of Engineering, Design and Technology, 19(6), pp. 1586-1600. ISSN 1726-0531

Sibanda, V; Mpofu, K and Trimble, J (2021) Methodology for the design of a reconfigurable guillotine shear and bending press machine (rgs&BPM). Journal of Engineering, Design and Technology, 19(6), pp. 1317-1343. ISSN 1726-0531

Sun, Q; He, L; Ding, F; Chen, X; Ding, L and Tu, Y (2021) Modeling and analysis of structure parameters on the lifting force for power catwalk. Journal of Engineering, Design and Technology, 19(1), pp. 187-202. ISSN 1726-0531

Umar, M; Michael Ikpi, O; Auwal Sani, A and Abubakar Garba, S (2021) Modelling of mechanical properties of pa6 based reinforced graphite and graphite nano platelets composites using different aspect ratio. Journal of Engineering, Design and Technology, 19(4), pp. 809-827. ISSN 1726-0531

Moeti, M; Jacques, E; Feng, W and North, C (2021) Modelling the effect of computation sampling on insight error in computational fluid dynamics scientific simulation. Journal of Engineering, Design and Technology, 19(1), pp. 263-290. ISSN 1726-0531

Faraji, A (2021) Neuro-fuzzy system based model for prediction of project performance in downstream sector of petroleum industry in Iran. Journal of Engineering, Design and Technology, 19(6), pp. 1268-1290. ISSN 1726-0531

Barour, S and Zergua, A (2021) Numerical analysis of reinforced concrete beams strengthened in shear using carbon fiber reinforced polymer materials. Journal of Engineering, Design and Technology, 19(2), pp. 339-357. ISSN 1726-0531

Mahdizadeh, H and Nor Mariah, A (2021) Numerical study of heat transfer in 90° bend tube by ai₂o₃ nano fluids using fluid injection. Journal of Engineering, Design and Technology, 19(1), pp. 127-148. ISSN 1726-0531

Othman, A A E and Alamoudy, F O (2021) Optimising building performance through integrating risk management and building information modelling during the design process. Journal of Engineering, Design and Technology, 19(6), pp. 1233-1267. ISSN 1726-0531

Jirandeh, R R; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Plate-fin heat exchanger network modeling, design and optimization: a novel and comprehensive algorithm. Journal of Engineering, Design and Technology, 19(5), pp. 1017-1043. ISSN 1726-0531

Tu, J; Liu, Y; Zhou, M and Li, R (2021) Prediction and analysis of compressive strength of recycled aggregate thermal insulation concrete based on GA-bp optimization network. Journal of Engineering, Design and Technology, 19(2), pp. 412-422. ISSN 1726-0531

Mane, K M; Kulkarni, D K and Prakash, K B (2021) Prediction of shear strength of concrete produced by using pozzolanic materials and partly replacing nfa by MS using ann. Journal of Engineering, Design and Technology, 19(2), pp. 578-587. ISSN 1726-0531

Yembi Renault, B; Agumba, J N and Ansary, N (2021) Regression analysis of the influence of demographic characteristics using risk management practices within South African small and medium construction enterprises. Journal of Engineering, Design and Technology, 19(6), pp. 1505-1529. ISSN 1726-0531

Aluko, O R; Godwin Iroroakpo, I and Mewomo, M C (2021) Relationship between perceived service quality and client satisfaction indicators of engineering consultancy services in building projects. Journal of Engineering, Design and Technology, 19(2), pp. 557-577. ISSN 1726-0531

Almazrouei, M; Khalizani, K and Davidson, R (2021) Safety climate of UAE petroleum industry: A cross-validation using confirmatory factor analytic approach. Journal of Engineering, Design and Technology, 19(4), pp. 943-965. ISSN 1726-0531

Roy, S; Majumder, S; Bhattacharya, S and Sardar, I H (2021) Simulation and analysis of the effects of room surface reflectance combinations on a proposed retrofit illumination system of an office. Journal of Engineering, Design and Technology, 19(6), pp. 1620-1647. ISSN 1726-0531

Radebe, T B; Huan, Z and Baloyi, J (2021) Simulation of eutectic plates in medium refrigerated transport. Journal of Engineering, Design and Technology, 19(1), pp. 62-80. ISSN 1726-0531

Gbadegesin, A O; Sun, Y and Nwulu, N I (2021) Stacked value streams of hybrid energy storage systems in prosumer microgrids. Journal of Engineering, Design and Technology, 19(5), pp. 1063-1079. ISSN 1726-0531

Hulio, Z H; Yousufzai, G and Jiang, W (2021) Statistical analysis of wind resource and energy potential assessment of quaidabad site, sindh Pakistan. Journal of Engineering, Design and Technology, 19(6), pp. 1291-1316. ISSN 1726-0531

Aliu, J and Aigbavboa, C O (2021) Structural determinants of graduate employability: Impact of university and industry collaborations. Journal of Engineering, Design and Technology, 19(5), pp. 1080-1100. ISSN 1726-0531

Moniri, M R; Akbar Alem, T; Ayough, A and Zandieh, M (2021) Turnaround project risk assessment using hybrid fuzzy swara and edas method: Case of upstream oil process industries in Iran. Journal of Engineering, Design and Technology, 19(4), pp. 966-988. ISSN 1726-0531

Zaheer, M I; Ajayi, S O; Sambo Lyson, Z; Oyegoke, A and Kazemi, H (2021) Understanding the key competencies of market-ready building surveying graduates from employers' perspectives. Journal of Engineering, Design and Technology, 19(1), pp. 291-314. ISSN 1726-0531

Sharma, A and Sharma, R K (2021) Uplift behaviour of axial granular pile anchor encased with geogrid in cohesionless soil. Journal of Engineering, Design and Technology, 19(2), pp. 588-602. ISSN 1726-0531

Malge, A M and Pawar, P M (2021) Wind tunnel and numerical study of multi-storey vertical axis wind turbines with different configurations. Journal of Engineering, Design and Technology, 19(6), pp. 1358-1372. ISSN 1726-0531

van Tonder, P and Low, M S (2021) The effect of CO loading on the properties of normal concrete vs fly ash concrete. Journal of Engineering, Design and Technology, 19(6), pp. 1472-1487. ISSN 1726-0531

Shi, J; Hu, J; Ma, M and Wang, H (2021) An environmental impact analysis method of machine-tool cutting units based on LCA. Journal of Engineering, Design and Technology, 19(5), pp. 1192-1206. ISSN 1726-0531

Johnson, A; Rotimi, J O B and Wilkinson, S (2021) An evaluation of risk factors impacting project budget performance in New Zealand. Journal of Engineering, Design and Technology, 19(1), pp. 41-61. ISSN 1726-0531

Ayman Ahmed Ezzat, O and Lamis Yasser Wagih, Y (2021) A framework for implementing integrated project delivery in architecture design firms in Egypt. Journal of Engineering, Design and Technology, 19(3), pp. 721-757. ISSN 1726-0531

Amewornu, E M and Nwulu, N I (2021) A framework for the techno-economic and reliability analysis of grid connected microgrids. Journal of Engineering, Design and Technology, 19(3), pp. 659-685. ISSN 1726-0531

Mostafa Adel, E; Elnawawy, O; Ayman Ahmed Ezzat, O and Badawy, M (2021) A framework to activate the health and safety regulations in the Egyptian construction industry. Journal of Engineering, Design and Technology, 19(5), pp. 1158-1191. ISSN 1726-0531

Heidari, A; Imani, D M and Khalilzadeh, M (2021) A hub location model in the sustainable supply chain considering customer segmentation. Journal of Engineering, Design and Technology, 19(6), pp. 1387-1420. ISSN 1726-0531

Naga Vamsi Krishna, J; Kota, S and Venkataraman, P B (2021) An impact of simulation labs on engineering students' academic performance: A critical investigation. Journal of Engineering, Design and Technology, 19(1), pp. 103-126. ISSN 1726-0531

Spellacy, J; Edwards, D J; Roberts, C J; Hayhow, S and Shelbourn, M (2021) An investigation into the role of the quantity surveyor in the value management workshop process. Journal of Engineering, Design and Technology, 19(2), pp. 423-445. ISSN 1726-0531

Mdibi, L; Van Zyl, R; Kosch, M and Ward, J (2021) A land-based hf transmitter for ionospheric propagation studies using superdarn radars. Journal of Engineering, Design and Technology, 19(6), pp. 1648-1659. ISSN 1726-0531

Hamza, H and Alshibani, A (2021) A multi-criteria decision-making model for selecting curtain wall systems in office buildings. Journal of Engineering, Design and Technology, 19(4), pp. 904-931. ISSN 1726-0531

Innocent Chigozie, O (2021) The need for and benefits of buildability analysis: Nigeria as a case study. Journal of Engineering, Design and Technology, 19(5), pp. 1207-1230. ISSN 1726-0531

Mostafaeipour, A; Qolipour, M; Rezaei, M; Jahangiri, M; Goli, A and Sedaghat, A (2021) A novel integrated approach for ranking solar energy location planning: A case study. Journal of Engineering, Design and Technology, 19(3), pp. 698-720. ISSN 1726-0531

Muhammad Ridwan Andi, P; Adhe Rizky, A; Salvia, F A and Abdullah, A (2021) A novel optimisation model in the collaborative supply chain with production time capacity consideration. Journal of Engineering, Design and Technology, 19(3), pp. 647-658. ISSN 1726-0531

Agyekum, K; Ghansah, F A; Tetteh, P A and Amudjie, J (2021) The role of project managers (pms) in construction health and safety implementation in Ghana. Journal of Engineering, Design and Technology, 19(1), pp. 245-262. ISSN 1726-0531

Akinlolu Temisola, M; Oladimeji Benedict, O and Haupt, T C (2021) A scientometric review and meta-analysis of the health and safety of women in construction: Structure and research trends. Journal of Engineering, Design and Technology, 19(2), pp. 446-466. ISSN 1726-0531

Chellappa, V; Srivastava, V and Salve, U R (2021) A systematic review of construction workers' health and safety research in India. Journal of Engineering, Design and Technology, 19(6), pp. 1488-1504. ISSN 1726-0531

Owusu-Manu, D G; Debrah, C; Oduro-Ofori, E; Edwards, D J and Antwi-Afari, P (2020) Attributable indicators for measuring the level of greenness of cities in developing countries: lessons from Ghana. Journal of Engineering, Design and Technology, 19(3), pp. 625-646. ISSN 1726-0531

Kwofie, T E; Aigbavboa, C O and Thwala, W D (2020) Clusters of key barriers to life cycle assessment adoption in the South African construction industry: Perspectives of stakeholders. Journal of Engineering, Design and Technology, 19(4), pp. 888-903. ISSN 1726-0531

Velasco-Aquino, A A; Espuna-Mujica, J A; Perez-Sanchez, J F; Zuñiga-Leal, C; Palacio-Perez, A and Suarez-Dominguez, E J (2020) Compressed earth block reinforced with coconut fibers and stabilized with aloe vera and lime. Journal of Engineering, Design and Technology, 19(3), pp. 795-807. ISSN 1726-0531

Adamtey, S (2020) Cost and time performance analysis of progressive design-build projects. Journal of Engineering, Design and Technology, 19(3), pp. 686-697. ISSN 1726-0531

Abediniangerabi, B; Shahandashti, M and Makhmalbaf, A (2020) Coupled transient heat and moisture transfer investigation of facade panel connections. Journal of Engineering, Design and Technology, 19(3), pp. 758-777. ISSN 1726-0531

Farzin, A; Ghazi, M; Sotoodeh, A F and Nikian, M (2020) Economic optimization of heat exchanger networks based on geometric parameters using hybrid genetic-particle swarm algorithm technique. Journal of Engineering, Design and Technology, 19(4), pp. 989-1015. ISSN 1726-0531

Alluqmani, A E (2020) Effect of the transversal-spacing of stirrup-legs on the behavior and strength of shallow concealed RC beams. Journal of Engineering, Design and Technology, 19(4), pp. 932-942. ISSN 1726-0531

Magoda, C M; Gryzagoridis, J and Kanyarusoke, K (2020) Effective heat conductivity of Honeycomb (porous) composite panel. Journal of Engineering, Design and Technology, 19(4), pp. 876-887. ISSN 1726-0531

Mhundwa, R and Simon, M (2020) Electrical energy prediction using a surface fitting model for an on-farm direct expansion bulk milk cooler (DXBMC) in South Africa. Journal of Engineering, Design and Technology, 19(3), pp. 778-794. ISSN 1726-0531

Agyekum, K; Adinyira, E and Amudjie, J (2020) Ethical misconducts within the invitation to tender and tender evaluation and award stages of construction contracts in Ghana. Journal of Engineering, Design and Technology, 19(5), pp. 1101-1123. ISSN 1726-0531

Oluleye, I B; Ogunleye, M B and Oyetunji, A K (2020) Evaluation of the critical success factors for sustainable housing delivery: Analytic hierarchy process approach. Journal of Engineering, Design and Technology, 19(5), pp. 1044-1062. ISSN 1726-0531

Aghimien, E I; Aghimien, L M; Petinrin, O O and Aghimien, D O (2020) High-performance computing for computational modelling in built environment-related studies: A scientometric review. Journal of Engineering, Design and Technology, 19(5), pp. 1138-1157. ISSN 1726-0531

Muleya, F; Mulenga, B; Zulu, S L; Nwaubani, S; Tembo, C K and Mushota, H (2020) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Owusu-Manu, D G; Adjei, T K; Sackey, D M; Edwards, D J and Hosseini, R M (2020) Mainstreaming sustainable development goals in Ghana’s energy sector within the framework of public–private partnerships: Challenges, opportunities and strategies. Journal of Engineering, Design and Technology, 19(3), pp. 605-624. ISSN 1726-0531

Umar, M; Ofem, M I; Anwar, A S and Salisu, A G (2020) Modelling of mechanical properties of Pa6 based reinforced graphite and graphite nano platelets composites using different aspect ratio. Journal of Engineering, Design and Technology, 19(4), pp. 809-827. ISSN 1726-0531

Ramezanpour Jirandeh, R; Ghazi, M; Sotoodeh, A F and Nikian, M (2020) Plate-fin heat exchanger network modeling, design and optimization: A novel and comprehensive algorithm. Journal of Engineering, Design and Technology, 19(5), pp. 1017-1043. ISSN 1726-0531

Almazrouei, M; Khalid, K and Davidson, R (2020) Safety climate of UAE petroleum industry: a cross-validation using confirmatory factor analytic approach. Journal of Engineering, Design and Technology, 19(4), pp. 943-965. ISSN 1726-0531

Gbadegesin, A O; Sun, Y and Nwulu, N I (2020) Stacked value streams of hybrid energy storage systems in prosumer microgrids. Journal of Engineering, Design and Technology, 19(5), pp. 1063-1079. ISSN 1726-0531

Aliu, J and Aigbavboa, C O (2020) Structural determinants of graduate employability: impact of university and industry collaborations. Journal of Engineering, Design and Technology, 19(5), pp. 1080-1100. ISSN 1726-0531

Moniri, M R; Alem Tabriz, A; Ayough, A and Zandieh, M (2020) Turnaround project risk assessment using hybrid fuzzy SWARA and EDAS method: Case of upstream oil process industries in Iran. Journal of Engineering, Design and Technology, 19(4), pp. 966-988. ISSN 1726-0531

Othman, A A E and Youssef, L Y W (2020) A framework for implementing integrated project delivery in architecture design firms in Egypt. Journal of Engineering, Design and Technology, 19(3), pp. 721-757. ISSN 1726-0531

Amewornu, E M and Nwulu, N I (2020) A framework for the techno-economic and reliability analysis of grid connected microgrids. Journal of Engineering, Design and Technology, 19(3), pp. 659-685. ISSN 1726-0531

Elsebaei, M A; Elnawawy, O; Othman, A A E and Badawy, M (2020) A framework to activate the health and safety regulations in the Egyptian construction industry. Journal of Engineering, Design and Technology, 19(5), pp. 1158-1191. ISSN 1726-0531

Hamida, H and Alshibani, A (2020) A multi-criteria decision-making model for selecting curtain wall systems in office buildings. Journal of Engineering, Design and Technology, 19(4), pp. 904-931. ISSN 1726-0531

Osuizugbo, I C (2020) The need for and benefits of buildability analysis: Nigeria as a case study. Journal of Engineering, Design and Technology, 19(5), pp. 1207-1230. ISSN 1726-0531

Mostafaeipour, A; Qolipour, M; Rezaei, M; Jahangiri, M; Goli, A and Sedaghat, A (2020) A novel integrated approach for ranking solar energy location planning: A case study. Journal of Engineering, Design and Technology, 19(3), pp. 698-720. ISSN 1726-0531

Purnomo, M R A; Anugerah, A R; Aulia, S F and Azzam, A (2020) A novel optimisation model in the collaborative supply chain with production time capacity consideration. Journal of Engineering, Design and Technology, 19(3), pp. 647-658. ISSN 1726-0531