Browse by Journal

Yan, J (2020) 3D printing optimization algorithm based on back-propagation neural network. Journal of Engineering, Design and Technology, 18(5), pp. 1223-1230. ISSN 1726-0531

Othman, A A E and Abdelrahim, S M (2020) Achieving sustainability through reducing construction waste during the design process: A value management perspective. Journal of Engineering, Design and Technology, 18(2), pp. 362-377. ISSN 1726-0531

Onubi, H O; Yusof, N and Hassan, A S (2020) Adopting green construction practices: Health and safety implications. Journal of Engineering, Design and Technology, 18(3), pp. 635-652. ISSN 1726-0531

Olabanji, O M and Mpofu, K (2020) Adopting hybridized multicriteria decision model as a decision tool in engineering design. Journal of Engineering, Design and Technology, 18(2), pp. 451-479. ISSN 1726-0531

Yap, J B H; Lee, K Y and Skitmore, M (2020) Analysing the causes of corruption in the Malaysian construction industry. Journal of Engineering, Design and Technology, 18(6), pp. 1823-1847. ISSN 1726-0531

Hellas, M S; Chaib, R and Verzea, I (2020) Artificial intelligence treating the problem of uncertainty in quantitative risk analysis (QRA). Journal of Engineering, Design and Technology, 18(1), pp. 40-54. ISSN 1726-0531

Dadzie, J; Runeson, G and Ding, G (2020) Assessing determinants of sustainable upgrade of existing buildings: The case of sustainable technologies for energy efficiency. Journal of Engineering, Design and Technology, 18(1), pp. 270-292. ISSN 1726-0531

Almazrouei, M; Khalid, K; Abdallah, S and Davidson, R (2020) Assessing the health, safety, and environment culture in the United Arab Emirates oil and gas industry. Journal of Engineering, Design and Technology, 18(2), pp. 495-512.

Asiedu, R O and Gyadu-Asiedu, W (2020) Assessing the predictability of construction time overruns using multiple linear regression and Markov chain Monte Carlo. Journal of Engineering, Design and Technology, 18(3), pp. 583-600. ISSN 1726-0531

Adebisi, E O; Alao, O O and Ojo, S O (2020) Assessment of early warning signs predisposing building projects to failure in Nigeria. Journal of Engineering, Design and Technology, 18(6), pp. 1403-1423. ISSN 1726-0531

Williams, J; Fugar, F and Adinyira, E (2020) Assessment of health and safety culture maturity in the construction industry in developing economies: A case of Ghanaian construction industry. Journal of Engineering, Design and Technology, 18(4), pp. 865-881. ISSN 1726-0531

Adu, E T and Opawole, A (2020) Assessment of performance of teamwork in construction projects delivery in South-Southern Nigeria. Journal of Engineering, Design and Technology, 18(1), pp. 230-250. ISSN 1726-0531

Davila Delgado, J M and Oyedele, L O (2020) BIM data model requirements for asset monitoring and the circular economy. Journal of Engineering, Design and Technology, 18(5), pp. 1269-1285. ISSN 1726-0531

Wang, H; Guo, T and Sun, H (2020) Bond–slip constitutive relation of mortar anchor under different loading rates. Journal of Engineering, Design and Technology, 18(4), pp. 761-772. ISSN 1726-0531

Chaparro, D A; Ying, F J; Rotimi, F E and Egbelakin, T (2020) Commute and labour productivity: Investigation of inner city construction sites. Journal of Engineering, Design and Technology, 18(5), pp. 1305-1319. ISSN 1726-0531

Babatunde, S O; Ekundayo, D; Adekunle, A O and Bello, W (2020) Comparative analysis of drivers to BIM adoption among AEC firms in developing countries: A case of Nigeria. Journal of Engineering, Design and Technology, 18(6), pp. 1425-1447. ISSN 1726-0531

Gharehbaghi, K; McManus, K; Hurst, N; Robson, K and Myers, M (2020) Complexities in mega rail transportation projects: “Sydney metro” and “Melbourne metro rail” insight. Journal of Engineering, Design and Technology, 18(5), pp. 973-990. ISSN 1726-0531

Benabdellah, A C; Benghabrit, A and Bouhaddou, I (2020) Complexity drivers in engineering design: Toward a decision support system based on an organizational perspective. Journal of Engineering, Design and Technology, 18(6), pp. 1663-1690. ISSN 1726-0531

Blindheim, J; Elverum, C W; Welo, T and Steinert, M (2020) Concept evaluation in new product development: A set-based method utilizing rapid prototyping and physical modelling. Journal of Engineering, Design and Technology, 18(5), pp. 1139-1151. ISSN 1726-0531

Adeyemi, B S and Aigbavboa, C O (2020) Conflict factors investigation among construction professionals in Nigeria. Journal of Engineering, Design and Technology, 18(5), pp. 1121-1137. ISSN 1726-0531

Olawale, O A; Oyedele, L O and Owolabi, H A (2020) Construction practitioners’ perception of key drivers of reputation in mega-construction projects. Journal of Engineering, Design and Technology, 18(6), pp. 1571-1592. ISSN 1726-0531

Omopariola, E D; Windapo, A; Edwards, D J and Thwala, W D (2020) Contractors’ perceptions of the effects of cash flow on construction projects. Journal of Engineering, Design and Technology, 18(2), pp. 308-325. ISSN 1726-0531

Santoso, D S and Gallage, P G M P (2020) Critical factors affecting the performance of large construction projects in developing countries: A case study of Sri Lanka. Journal of Engineering, Design and Technology, 18(3), pp. 531-556. ISSN 1726-0531

Mbae, A M and Nwulu, N I (2020) Day-ahead load forecasting using improved grey Verhulst model. Journal of Engineering, Design and Technology, 18(5), pp. 1335-1348. ISSN 1726-0531

Fei, C; Xiahou, P and Wang, F (2020) Design and control of grid connected inverter for harmonic suppression. Journal of Engineering, Design and Technology, 18(5), pp. 1349-1356. ISSN 1726-0531

Khamseh, A and Marei, P (2020) Designing a model developed to assess the capabilities of technological innovation in Iranian construction of power plant equipment industries. Journal of Engineering, Design and Technology, 18(5), pp. 1241-1249. ISSN 1726-0531

Amida, A; Chang, I and Yearwood, D (2020) Designing a practical lab-based assessment: a case study. Journal of Engineering, Design and Technology, 18(3), pp. 567-581. ISSN 1726-0531

Shirzad Talatappeh, S and Lakzi, A (2020) Developing a model for investigating the impact of cloud-based systems on green supply chain management. Journal of Engineering, Design and Technology, 18(4), pp. 741-760. ISSN 1726-0531

Asad, M M; Hassan, R B; Sherwani, F; Rind, I A and Maiji, Y (2020) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation: A proposed framework. Journal of Engineering, Design and Technology, 18(5), pp. 959-971. ISSN 1726-0531

Abdullahi, B; Ibrahim, Y M; Ibrahim, A and Bala, K (2020) Development of e-tendering evaluation system for Nigerian public sector. Journal of Engineering, Design and Technology, 18(1), pp. 122-149. ISSN 1726-0531

Sahu, V; Attri, R; Gupta, P and Yadav, R (2020) Development of eco friendly brick using water treatment plant sludge and processed tea waste. Journal of Engineering, Design and Technology, 18(3), pp. 727-738. ISSN 1726-0531

Dave, N; Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology, 18(5), pp. 1321-1333. ISSN 1726-0531

Sibanda, V; Mpofu, K; Trimble, J and Kanganga, M (2020) Development of part families for a reconfigurable machine. Journal of Engineering, Design and Technology, 18(5), pp. 991-1014. ISSN 1726-0531

Asa, E; Shrestha, M; Baffoe-Twum, E and Awuku, B (2020) Development of sustainable construction material from fly ash Class C. Journal of Engineering, Design and Technology, 18(6), pp. 1615-1640. ISSN 1726-0531

Mengistu, D G and Mahesh, G (2020) Dimensions for improvement of construction management practice in Ethiopian construction industry. Journal of Engineering, Design and Technology, 18(1), pp. 21-39. ISSN 1726-0531

Ogbu, C P and Adindu, C C (2020) Direct risk factors and cost performance of road projects in developing countries: Contractors’ perspective. Journal of Engineering, Design and Technology, 18(2), pp. 326-342. ISSN 1726-0531

Othman, A A E and Khalil, M H (2020) Divergent heritage sustainability: A threefold approach through lean talent management. Journal of Engineering, Design and Technology, 18(1), pp. 150-171. ISSN 1726-0531

Gupta, N K; Thakre, G D and Kumar, M (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology, 18(5), pp. 1357-1370. ISSN 1726-0531

Shekhawat, P; Sharma, G and Singh, R M (2020) Durability analysis of eggshell powder–flyash geopolymer composite subjected to wetting–drying cycles. Journal of Engineering, Design and Technology, 18(6), pp. 2043-2060. ISSN 1726-0531

Bhardwaj, A and Sharma, R K (2020) Effect of industrial wastes and lime on strength characteristics of clayey soil. Journal of Engineering, Design and Technology, 18(6), pp. 1749-1772. ISSN 1726-0531

Aliu, J and Aigbavboa, C O (2020) Employers’ perception of employability skills among built-environment graduates. Journal of Engineering, Design and Technology, 18(4), pp. 847-864. ISSN 1726-0531

Jiang, Q (2020) Estimation of construction project building cost by back-propagation neural network. Journal of Engineering, Design and Technology, 18(3), pp. 601-609. ISSN 1726-0531

Amoah, C and Pretorius, L (2020) Evaluation of the impact of risk management on project performance in small construction firms in South Africa: The case study of construction systems. Journal of Engineering, Design and Technology, 18(3), pp. 611-634. ISSN 1726-0531

Malhotra, M; Sahu, V; Srivastava, A and Misra, A K (2020) Experimental and numerical investigation of the effect of pre-existing utility tunnel on the bearing capacity of shallow footing in sandy soils. Journal of Engineering, Design and Technology, 18(3), pp. 513-529. ISSN 1726-0531

Dandan, T H; Sweis, G; Sukkari, L S and Sweis, R J (2020) Factors affecting the accuracy of cost estimate during various design stages. Journal of Engineering, Design and Technology, 18(4), pp. 787-819. ISSN 1726-0531

Agyekum, K; Kissi, E; Danku, J C; Ampratwum, G and Amegatsey, G S (2020) Factors driving the career progression of construction project managers. Journal of Engineering, Design and Technology, 18(6), pp. 1773-1791. ISSN 1726-0531

Correia, J M; Sutrisna, M and Zaman, A U (2020) Factors influencing the implementation of off-site manufacturing in commercial projects in Western Australia: A proposed research agenda. Journal of Engineering, Design and Technology, 18(6), pp. 1449-1468. ISSN 1726-0531

d'Apolito, L and Hong, H (2020) Forklift truck performance simulation and fuel consumption estimation. Journal of Engineering, Design and Technology, 18(3), pp. 689-703. ISSN 1726-0531

Baldissera, P and Delprete, C (2020) From PBL to innovation: A decennial case-study from an HPV student team. Journal of Engineering, Design and Technology, 18(4), pp. 773-786. ISSN 1726-0531

Patel, T D; Haupt, T C and Bhatt, T (2020) Fuzzy probabilistic approach for risk assessment of BOT toll roads in Indian context. Journal of Engineering, Design and Technology, 18(1), pp. 251-269. ISSN 1726-0531

Woju, U W and Balu, A S (2020) Fuzzy uncertainty and its applications in reinforced concrete structures. Journal of Engineering, Design and Technology, 18(5), pp. 1175-1191. ISSN 1726-0531

Hassan, A; Purnomo, M R A and Anugerah, A R (2020) Fuzzy-analytical-hierarchy process in failure mode and effect analysis (FMEA) to identify process failure in the warehouse of a cement industry. Journal of Engineering, Design and Technology, 18(2), pp. 378-388. ISSN 1726-0531

Taofeeq, M D; Adeleke, A Q and Lee, C K (2020) Government policy as a key moderator to contractors’ risk attitudes among Malaysian construction companies. Journal of Engineering, Design and Technology, 18(6), pp. 1543-1569. ISSN 1726-0531

Wang, L (2020) Home intelligent lighting control system based on wireless sensor. Journal of Engineering, Design and Technology, 18(5), pp. 1231-1240. ISSN 1726-0531

Ibn Majdoub Hassani, Z; El Barkany, A; Jabri, A; El Abbassi, I and Darcherif, A M (2020) Hybrid approach for solving the integrated planning and scheduling production problem. Journal of Engineering, Design and Technology, 18(1), pp. 172-189. ISSN 1726-0531

Moses, T; Heesom, D and Oloke, D (2020) Implementing 5D BIM on construction projects: Contractor perspectives from the UK construction sector. Journal of Engineering, Design and Technology, 18(6), pp. 1867-1888. ISSN 1726-0531

Owusu-Manu, D G; Ghansah, F A; Darko, A; Asiedu, R O and Edwards, D J (2020) Insurable and non-insurable risks in complex project deals: Case of the Ghanaian construction industry. Journal of Engineering, Design and Technology, 18(6), pp. 1971-1995. ISSN 1726-0531

Syed Abu Bakar, S P; Jaafar, M and Muhibudin, M (2020) Intensifying business success of Malaysian housing development firms through entrepreneurial learning. Journal of Engineering, Design and Technology, 18(1), pp. 190-210. ISSN 1726-0531

Gamil, Y; Abdullah, M A; Abdul Rahman, I and Asad, M M (2020) Internet of things in construction industry revolution 4.0: Recent trends and challenges in the Malaysian context. Journal of Engineering, Design and Technology, 18(5), pp. 1091-1102. ISSN 1726-0531

Amany, A; Taghizade, K and Noorzai, E (2020) Investigating conflicts of expert contractors using the last planner system in building information modeling process. Journal of Engineering, Design and Technology, 18(6), pp. 1381-1402. ISSN 1726-0531

Djafri, R; Mohamed Osman, M; Suzilawati Rabe, N and Shuid, S (2020) Investigating quality of life by residents of social housing in eastern Algeria: a structural equation modelling. Journal of Engineering, Design and Technology, 18(6), pp. 1907-1926. ISSN 1726-0531

Yap, J B H and Toh, H M (2020) Investigating the principal factors impacting knowledge management implementation in construction organisations. Journal of Engineering, Design and Technology, 18(1), pp. 55-69. ISSN 1726-0531

Mostafaeipour, A; Sadeghi, S; Jahangiri, M; Nematollahi, O and Rezaeian Sabbagh, A (2020) Investigation of accurate location planning for wind farm establishment: A case study. Journal of Engineering, Design and Technology, 18(4), pp. 821-845. ISSN 1726-0531

Marinelli, M and Salopek, M (2020) Joint risk management and collaborative ethos: Exploratory research in the UK construction sector. Journal of Engineering, Design and Technology, 18(2), pp. 343-361. ISSN 1726-0531

Yap, J B H and Cheah, S Y (2020) Key challenges faced by Chinese contractors in Malaysian construction industry: Empirical study. Journal of Engineering, Design and Technology, 18(3), pp. 705-726. ISSN 1726-0531

Aghimien, D O; Aigbavboa, C O; Oke, A E and Thwala, W D (2020) Mapping out research focus for robotics and automation research in construction-related studies: A bibliometric approach. Journal of Engineering, Design and Technology, 18(5), pp. 1063-1079. ISSN 1726-0531

Kwofie, T E; Aigbavboa, C O and Thwala, W D (2020) Measures to improve the adoption of life cycle assessment in the South African construction industry. Journal of Engineering, Design and Technology, 18(2), pp. 480-494. ISSN 1726-0531

Derradji, R and Hamzi, R (2020) Multi-criterion analysis based on integrated process-risk optimization. Journal of Engineering, Design and Technology, 18(5), pp. 1015-1035. ISSN 1726-0531

Khalilzadeh, M; Balafshan, R and Hafezalkotob, A (2020) Multi-objective mathematical model based on fuzzy hybrid multi-criteria decision-making and FMEA approach for the risks of oil and gas projects. Journal of Engineering, Design and Technology, 18(6), pp. 1997-2016. ISSN 1726-0531

Borer, J (2020) Object oriented design of safety critical programmable equipment systems. Journal of Engineering, Design and Technology, 18(5), pp. 1081-1089. ISSN 1726-0531

Okampo, E J and Nwulu, N I (2020) Optimal energy mix for a reverse osmosis desalination unit considering demand response. Journal of Engineering, Design and Technology, 18(5), pp. 1287-1303. ISSN 1726-0531

Gaddala, K and Raju, P S (2020) Optimal location of UPQC for power quality improvement: Novel hybrid approach. Journal of Engineering, Design and Technology, 18(6), pp. 1519-1541. ISSN 1726-0531

Gbadamosi, S L and Nwulu, N I (2020) Optimal planning of renewable energy systems for power loss reduction in transmission expansion planning. Journal of Engineering, Design and Technology, 18(5), pp. 1209-1222. ISSN 1726-0531

Abadou, Y; Ghrieb, A; Bustamante, R and Faid, H (2020) Optimization by mixture design approach: Impact of marble and ceramic recycle on properties of mortar based on air lime. Journal of Engineering, Design and Technology, 18(6), pp. 1731-1747. ISSN 1726-0531

Jun, Z; Akbar, M A and Xin lei, W (2020) Optimization of design and measurement principle of six-components force/thrust measurement stand. Journal of Engineering, Design and Technology, 18(5), pp. 1371-1379. ISSN 1726-0531

Chileshe, N; Edwards, D J; Kavishe, N and Haupt, T C (2020) Perception on challenges impacting bid decision of indigenous building contractors in Dar es Salaam, Tanzania. Journal of Engineering, Design and Technology, 18(6), pp. 1641-1662. ISSN 1726-0531

Ikediashi, D; Udo, G and Ofoegbu, M (2020) Post-occupancy evaluation of University of Uyo buildings. Journal of Engineering, Design and Technology, 18(6), pp. 1711-1730. ISSN 1726-0531

Khan, M R and Sonawane, A (2020) Prediction of impact response in construction safety helmet using FEA. Journal of Engineering, Design and Technology, 18(3), pp. 557-566. ISSN 1726-0531

Zadok, Y (2020) Project-based learning in robotics meets junior high school. Journal of Engineering, Design and Technology, 18(5), pp. 941-958. ISSN 1726-0531

Luo, Z; Chen, Y; Cen, K; Pan, H; Zhong, M and He, J (2020) Research on comprehensive environmental impact assessment of shale gas development. Journal of Engineering, Design and Technology, 18(1), pp. 1-20. ISSN 1726-0531

Xia, Y (2020) Research on dynamic data monitoring of steel structure building information using BIM. Journal of Engineering, Design and Technology, 18(5), pp. 1165-1173. ISSN 1726-0531

Agyefi-Mensah, S; Kpamma, Z E and Hagan, D E (2020) Residential adaptations as users' tacit means of communicating spatial needs in housing design: A case study. Journal of Engineering, Design and Technology, 18(6), pp. 1593-1613. ISSN 1726-0531

Acheamfour, V K; Kissi, E; Adjei-Kumi, T and Adinyira, E (2020) Review of empirical arguments on contractor pre-qualification criteria. Journal of Engineering, Design and Technology, 18(1), pp. 70-83. ISSN 1726-0531

Noorzai, E and Golabchi, M (2020) Selecting a proper construction system in small and medium mass housing projects, considering success criteria and construction volume and height. Journal of Engineering, Design and Technology, 18(4), pp. 883-903. ISSN 1726-0531

Jahangiri, M; Haghani, A; Heidarian, S; Mostafaeipour, A; Raiesi, H A and Alidadi Shamsabadi, A (2020) Sensitivity analysis of using solar cells in regional electricity power supply of off-grid power systems in Iran. Journal of Engineering, Design and Technology, 18(6), pp. 1849-1866. ISSN 1726-0531

Singh, T; Kalra, M and Misra, A K (2020) Simplified probabilistic seismic assessment of dampers in tall and braced structures in buildings. Journal of Engineering, Design and Technology, 18(5), pp. 1037-1052. ISSN 1726-0531

Ankomah, E N; Ayarkwa, J and Agyekum, K (2020) Status of lean construction implementation among small and medium building contractors (SMBCs) in Ghana. Journal of Engineering, Design and Technology, 18(6), pp. 1691-1709. ISSN 1726-0531

Simpson, K B and Sam, A (2020) Strategies for health and safety management in Ghana. Journal of Engineering, Design and Technology, 18(2), pp. 431-450. ISSN 1726-0531

Eziefula, U G; Opara, H E and Eziefula, B I (2020) Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria. Journal of Engineering, Design and Technology, 18(5), pp. 1053-1061. ISSN 1726-0531

Swallow, M and Zulu, S (2020) Students’ awareness and perception of the value of BIM and 4D for site health and safety management. Journal of Engineering, Design and Technology, 18(2), pp. 414-430. ISSN 1726-0531

Bhavya Swathi, I; Suvarna Raju, L and Ramulu, P J (2020) Surface development by reinforcing nano-composites during friction stir processing: A review. Journal of Engineering, Design and Technology, 18(3), pp. 653-687. ISSN 1726-0531

Li, H; Xia, Q; Wang, L and Ma, Y (2020) Sustainability assessment of urban water environment treatment public-private partnership projects using fuzzy logic. Journal of Engineering, Design and Technology, 18(5), pp. 1251-1267. ISSN 1726-0531

Fiorineschi, L; Papini, S; Pugi, L; Rindi, A and Rotini, F (2020) Systematic design of a new gearbox for concrete mixers. Journal of Engineering, Design and Technology, 18(6), pp. 2017-2042. ISSN 1726-0531

Mostafaeipour, A; Qolipour, M; Rezaei, M and Goudarzi, H (2020) Techno-economic assessment of using wind power system for tribal region of Gachsaran in Iran. Journal of Engineering, Design and Technology, 18(2), pp. 293-307. ISSN 1726-0531

Neshat, N; Hadian, H and Rahimi Alangi, S (2020) Technological learning modelling towards sustainable energy planning. Journal of Engineering, Design and Technology, 18(1), pp. 84-101. ISSN 1726-0531

Arefizadeh, H and Shahir, H (2020) Three-dimensional analysis of anchored wall with concrete bearing pads. Journal of Engineering, Design and Technology, 18(6), pp. 1469-1486. ISSN 1726-0531

Woju, U W and Balu, A S (2020) Time-dependent safety performance of reinforced concrete structures. Journal of Engineering, Design and Technology, 18(5), pp. 1103-1120. ISSN 1726-0531

Rezaei, M; Mostafaeipour, A; Jafari, N; Naghdi-Khozani, N and Moftakharzadeh, A (2020) Wind and solar energy utilization for seawater desalination and hydrogen production in the coastal areas of southern Iran. Journal of Engineering, Design and Technology, 18(6), pp. 1951-1969. ISSN 1726-0531

Arowoiya, V A; Oke, A E; Aigbavboa, C O and Aliu, J (2020) An appraisal of the adoption internet of things (IoT) elements for sustainable construction. Journal of Engineering, Design and Technology, 18(5), pp. 1193-1208. ISSN 1726-0531

Hulio, Z H and Jiang, W (2020) An assessment of effects of non-stationary operational conditions on wind turbine under different wind scenario. Journal of Engineering, Design and Technology, 18(1), pp. 102-121. ISSN 1726-0531

Witmer, A P (2020) An ethnographic justification for establishment of a contextual engineering discipline. Journal of Engineering, Design and Technology, 18(2), pp. 389-413. ISSN 1726-0531

Soltani, M; Aouag, H and Mouss, M D (2020) An integrated framework using VSM, AHP and TOPSIS for simplifying the sustainability improvement process in a complex manufacturing process. Journal of Engineering, Design and Technology, 18(1), pp. 211-229. ISSN 1726-0531

Simpeh, E K and Smallwood, J J (2020) An integrated model for predicting the probability of adoption of green building in South Africa. Journal of Engineering, Design and Technology, 18(6), pp. 1927-1950. ISSN 1726-0531

Ghodki, M K; Swarup, A and Pal, Y (2020) A new IR and sprinkler based embedded controller directed robotic arm for automatic cleaning of solar panel. Journal of Engineering, Design and Technology, 18(4), pp. 905-921. ISSN 1726-0531

Hamurcu, A; Timur, Ş and Rızvanoğlu, K (2020) An overview of virtual reality within industrial design education. Journal of Engineering, Design and Technology, 18(6), pp. 1889-1905. ISSN 1726-0531

Usmani, A R A; Elshafey, A; Gheisari, M; Chai, C; Aminudin, E B and Tan, C S (2020) A scan to as-built building information modeling workflow: A case study in Malaysia. Journal of Engineering, Design and Technology, 18(4), pp. 923-940. ISSN 1726-0531

Ramdav, T and Harinarain, N (2020) A strategic framework for the survival of the quantity surveying profession. Journal of Engineering, Design and Technology, 18(6), pp. 1487-1518.

Erkan, I (2020) A system proposal for rapid detecting of anthropometric data and affecting design strategies. Journal of Engineering, Design and Technology, 18(6), pp. 1793-1822. ISSN 1726-0531

Osman, B and Zhu, H (2020) A virtual educational model on a CNC milling machine including and excluding two methods of fuzzy controllers. Journal of Engineering, Design and Technology, 18(5), pp. 1153-1163. ISSN 1726-0531