Browse by Journal

Fiorineschi, L (2018) Abstraction framework to support students in learning creative conceptual design. Journal of Engineering, Design and Technology, 16(4), pp. 616-636. ISSN 1726-0531

Othman, A A E and Abdelwahab, N M A (2018) Achieving sustainability through integrating risk management into the architectural design process. Journal of Engineering, Design and Technology, 16(1), pp. 25-43.

Dosumu, O and Aigbavboa, C O (2018) Adoption of light steel (LS) for building projects in South Africa. Journal of Engineering, Design and Technology, 16(5), pp. 711-733. ISSN 1726-0531

Adamtey, S and Onsarigo, L (2018) Analysis of pipe-bursting construction risks using probability-impact model. Journal of Engineering, Design and Technology, 16(3), pp. 461-477. ISSN 1726-0531

Shafabakhsh, G; Kashi, E and Tahani, M (2018) Analysis of runway pavement response under aircraft moving load by FEM. Journal of Engineering, Design and Technology, 16(2), pp. 233-243. ISSN 1726-0531

Babatunde, S O; Ekundayo, D; Babalola, O and Jimoh, J A (2018) Analysis of the drivers and benefits of BIM incorporation into quantity surveying profession: Academia and students' perspectives. Journal of Engineering, Design and Technology, 16(5), pp. 750-766. ISSN 1726-0531

Addy, M; Adinyira, E and Ayarkwa, J (2018) Antecedents of building information modelling adoption among quantity surveyors in Ghana: An application of a technology acceptance model. Journal of Engineering, Design and Technology, 16(2), pp. 313-326. ISSN 1726-0531

Khorshid, E; Alfadli, A and Falah, A (2018) Application of constraint infeasibility detection methods in engineering design problems. Journal of Engineering, Design and Technology, 16(2), pp. 285-312. ISSN 1726-0531

Yapage, N and Liyanapathirana, S (2018) Behaviour of geosynthetic reinforced column supported embankments. Journal of Engineering, Design and Technology, 16(1), pp. 44-62.

Owusu-Manu, D G; Kukah, A S; Edwards, D J; Pärn, E A; El-Gohary, H and Aigbavboa, C (2018) Causal relationships of moral hazard and adverse selection of Ghanaian public-private-partnership (PPP) construction projects. Journal of Engineering, Design and Technology, 16(3), pp. 439-460. ISSN 1726-0531

Umeokafor, N and Windapo, A (2018) Challenges to and opportunities for establishing a qualitative approach to built environment research in higher education institutions. Journal of Engineering, Design and Technology, 16(4), pp. 557-580. ISSN 1726-0531

Witmer, A P (2018) Contextual engineering assessment using an influence-identification tool. Journal of Engineering, Design and Technology, 16(6), pp. 889-909. ISSN 1726-0531

Kulkarni, S; Chapman, C; Shah, H; Parn, E A and Edwards, D J (2018) Designing an efficient tidal turbine blade through bio-mimicry: A systematic review. Journal of Engineering, Design and Technology, 16(1), pp. 101-124.

Quaigrain, R A and Issa, M H (2018) Development and validation of disability management indicators for the construction industry. Journal of Engineering, Design and Technology, 16(1), pp. 81-100.

Oke, A E and Aghimien, D O (2018) Drivers of value management in the Nigerian construction industry. Journal of Engineering, Design and Technology, 16(2), pp. 270-284. ISSN 1726-0531

Ndokwana, A and Fore, S (2018) Economic assessment of bioethanol production from maize in South Africa. Journal of Engineering, Design and Technology, 16(6), pp. 973-994. ISSN 1726-0531

Kulkarni, S; Edwards, D J; Parn, E A; Chapman, C; Aigbavboa, C O and Cornish, R (2018) Evaluation of vehicle lightweighting to reduce greenhouse gas emissions with focus on magnesium substitution. Journal of Engineering, Design and Technology, 16(6), pp. 869-888. ISSN 1726-0531

Agyekum, B; Kissi, E; Yamoah Agyemang, D and Badu, E (2018) Examining barriers for the utilization of non-traditional cost estimating models in developing countries: Ghanaian quantity surveyors' perspectives. Journal of Engineering, Design and Technology, 16(6), pp. 814-827. ISSN 1726-0531

Abadou, Y; Kettab, R and Ghreib, A (2018) Experimental investigation on the carbonation properties of dune sand ceramic waste mortar. Journal of Engineering, Design and Technology, 16(3), pp. 501-516. ISSN 1726-0531

Ogunsina, O; Ekwus Obiegbu, M and Adeniyi, O (2018) Factors confronting quantity surveying practice: The case of Nigeria. Journal of Engineering, Design and Technology, 16(5), pp. 767-782. ISSN 1726-0531

Alves, S and English, J (2018) Female students' preparedness for a male-dominated workplace. Journal of Engineering, Design and Technology, 16(4), pp. 581-595. ISSN 1726-0531

Hassan, O A B and Johansson, C (2018) Glued laminated timber and steel beams: A comparative study of structural design, economic and environmental consequences. Journal of Engineering, Design and Technology, 16(3), pp. 398-417. ISSN 1726-0531

Manamgoda, M G N; Perera, B A K S and Perera, C S R (2018) Impact of interest rates of bank loans on road construction: The case of Sri Lanka. Journal of Engineering, Design and Technology, 16(4), pp. 518-532. ISSN 1726-0531

Tangwe, S L and Simon, M (2018) Impact of standby losses and isotherm blanket contributions on the hot water cylinders of various heating technologies. Journal of Engineering, Design and Technology, 16(5), pp. 798-810. ISSN 1726-0531

Kwofie, T E; Aigbavboa, C O and Mpambela, J S (2018) Improving continuing professional development compliance among construction professionals through integrated strategies in South Africa. Journal of Engineering, Design and Technology, 16(4), pp. 637-653. ISSN 1726-0531

Savolainen, J M; Saari, A; Männistö, A and Kähkonen, K (2018) Indicators of collaborative design management in construction projects. Journal of Engineering, Design and Technology, 16(4), pp. 674-691. ISSN 1726-0531

Zhang, X; Wang, M; Zhou, B and Wang, X (2018) Influence of factors on collapse risk of loess tunnel: A multi-index assessment model. Journal of Engineering, Design and Technology, 16(5), pp. 734-749. ISSN 1726-0531

Aouad, R and Amara, I (2018) Influence of the cutting condition on the wear and the surface roughness in the steel aisi 4140 with mixed ceramic and diamond tool. Journal of Engineering, Design and Technology, 16(6), pp. 828-836. ISSN 1726-0531

Mahamadu, A-M; Manu, P; Booth, C; Olomolaiye, P; Coker, A; Ibrahim, A and Lamond, J (2018) Infrastructure procurement skills gap amongst procurement personnel in Nigeria's public sector. Journal of Engineering, Design and Technology, 16(1), pp. 2-24.

Dadashnejad, A A and Valmohammadi, C (2018) Investigating the effect of value stream mapping on operational losses: A case study. Journal of Engineering, Design and Technology, 16(3), pp. 478-500. ISSN 1726-0531

Bajjou, M S and Chafi, A (2018) Lean construction implementation in the Moroccan construction industry: Awareness, benefits and barriers. Journal of Engineering, Design and Technology, 16(4), pp. 533-556. ISSN 1726-0531

Kumar, S; Dhingra, A and Singh, B (2018) Lean-kaizen implementation: A roadmap for identifying continuous improvement opportunities in Indian small and medium sized enterprise. Journal of Engineering, Design and Technology, 16(1), pp. 143-160.

Zhou, B; Xue, Y; Li, M; Li, Z; Zhang, X and Tao, Y (2018) Longitudinal jet ventilation calculation and application of long highway tunnel. Journal of Engineering, Design and Technology, 16(2), pp. 256-269. ISSN 1726-0531

Gelaw, M; Ramulu, P J; Hailu, D and Desta, T (2018) Manufacturing and mechanical characterization of square bar made of aluminium scraps through friction stir back extrusion process. Journal of Engineering, Design and Technology, 16(4), pp. 596-615. ISSN 1726-0531

Reda, R; Saad, M; Ahmed, M Z and Abd-Elkader, H (2018) Monitoring joint quality: Taguchi approach and structure investigation. Journal of Engineering, Design and Technology, 16(2), pp. 211-232. ISSN 1726-0531

Opawole, A (2018) Penalty mechanisms for enforcing concessionaire performance in public-private partnership contracts in Nigeria. Journal of Engineering, Design and Technology, 16(1), pp. 161-191.

Megahed, N (2018) Reflections on studio-based learning: Assessment and critique. Journal of Engineering, Design and Technology, 16(1), pp. 63-80.

Romanello, G (2018) Stability analysis of mobile cranes and determination of outriggers loading. Journal of Engineering, Design and Technology, 16(6), pp. 938-958. ISSN 1726-0531

Senaratne, S; Mirza, O; Lambrousis, G and Fernandez-Soncini, A (2018) Structural applicability of steel fibre-recycled aggregate concrete in construction. Journal of Engineering, Design and Technology, 16(6), pp. 959-972. ISSN 1726-0531

Ulubeyli, S; Kazaz, A and Sahin, S (2018) Survival of construction SMEs in macroeconomic crises: Innovation-based competitive strategies. Journal of Engineering, Design and Technology, 16(4), pp. 654-673. ISSN 1726-0531

Faccio, M; Gamberi, M; Nedaei, M and Pilati, F (2018) Technical and economic modelling and evaluation of a water distribution system equipped with an autoclave for industrial production applications. Journal of Engineering, Design and Technology, 16(3), pp. 342-359. ISSN 1726-0531

Aluko, R O; Daniel, E I; Shamsideen Oshodi, O; Aigbavboa, C O and Abisuga, A O (2018) Towards reliable prediction of academic performance of architecture students using data mining techniques. Journal of Engineering, Design and Technology, 16(3), pp. 385-397. ISSN 1726-0531

De Silva, N; Rathnayake, U and Kulasekera, K M U B (2018) Under-reporting of construction accidents in Sri Lanka. Journal of Engineering, Design and Technology, 16(6), pp. 850-868. ISSN 1726-0531

Ayadi, A; Nasraoui, H; Driss, Z; Bouabidi, A and Abid, M S (2018) Unsteady state of a solar chimney power plant accoupled with a turbine: Case study. Journal of Engineering, Design and Technology, 16(2), pp. 244-255. ISSN 1726-0531

Chen, Y and Yang, Z (2018) Validity and reliability of rating scales for subjective breathing resistance of wearing respirators. Journal of Engineering, Design and Technology, 16(6), pp. 837-849. ISSN 1726-0531

Nawfal, S and Ali, F (2018) The acceleration of 3D graphics transformations based on cuda. Journal of Engineering, Design and Technology, 16(6), pp. 925-937. ISSN 1726-0531

Owusu-Manu, D G; Edwards, D J; Kukah, A S; Parn, E A; El-Gohary, H and Hosseini, M R (2018) An empirical examination of moral hazards and adverse selection on PPP projects: A case study of Ghana. Journal of Engineering, Design and Technology, 16(6), pp. 910-924. ISSN 1726-0531

Shurrab, J and Hussain, M (2018) An empirical study of the impact of lean on the performance of the construction industry in UAE. Journal of Engineering, Design and Technology, 16(5), pp. 694-710. ISSN 1726-0531

Olanrewaju, A and Tan, S Y (2018) An exploration into design criteria for affordable housing in Malaysia. Journal of Engineering, Design and Technology, 16(3), pp. 360-384. ISSN 1726-0531

Wang, L (2018) The fuzzy in evaluation of concrete structure engineering. Journal of Engineering, Design and Technology, 16(2), pp. 327-338. ISSN 1726-0531

Chinyio, E; Suresh, S and Salisu, J B (2018) The impacts of monetary rewards on public sector employees in construction: A case of Jigawa State in Nigeria. Journal of Engineering, Design and Technology, 16(1), pp. 125-142.

Owusu-Manu, D G; John Edwards, D; Pärn, E A; Antwi-Afari, M F and Aigbavboa, C (2018) The knowledge enablers of knowledge transfer: A study in the construction industries in Ghana. Journal of Engineering, Design and Technology, 16(2), pp. 194-210. ISSN 1726-0531

Othman, A A E and Elsaay, H (2018) A learning-based framework adopting post occupancy evaluation for improving the performance of architectural design firms. Journal of Engineering, Design and Technology, 16(3), pp. 418-438. ISSN 1726-0531