Browse by Journal

Vinodh, S and Rathod, G (2014) Application of life cycle assessment and Monte Carlo simulation for enabling sustainable product design. Journal of Engineering, Design and Technology, 12(3), pp. 307-315.

Emuze, F and Smallwood, J J (2014) Collaborative working in South African construction: Contractors' perspectives. Journal of Engineering, Design and Technology, 12(3), pp. 294-306.

Holt, G D and Goulding, J S (2014) Conceptualisation of ambiguous-mixed-methods within building and construction research. Journal of Engineering, Design and Technology, 12(2), pp. 244-262. ISSN 1726-0531

Kumar, S D; Kumar, K B and Sharma, R K (2014) Delay model for dynamically switching coupled on-chip interconnects. Journal of Engineering, Design and Technology, 12(3), pp. 364-373.

Alluqmani, A E (2014) Design and behaviour of R.C. Beams to ACI318-and-SBC304; and EC2 codes when subjected to asymmetric loading. Journal of Engineering, Design and Technology, 12(2), pp. 158-176. ISSN 1726-0531

Fouchal, F; Hassan, T M and Loveday, D L (2014) Design methodology for integrating multipath systems (building services). Journal of Engineering, Design and Technology, 12(4), pp. 491-506.

Vinodh, S and Jayakrishna, K (2014) Development of integrated ecqfd, LCA and sustainable analysis model: A case study in an automotive component manufacturing organization. Journal of Engineering, Design and Technology, 12(1), pp. 102-127. ISSN 1726-0531

Dundu, M (2014) Effect of defects on the strength of welds. Journal of Engineering, Design and Technology, 12(4), pp. 410-422.

Kiyang, S T and van Zyl, R (2014) Empirical investigation of wireless sensor network performance in noisy environments. Journal of Engineering, Design and Technology, 12(1), pp. 29-38. ISSN 1726-0531

Fapohunda, J A and Chileshe, N (2014) Essential factors towards optimal utilisation of construction resources. Journal of Engineering, Design and Technology, 12(4), pp. 461-474.

Ayodeji, F J (2014) Evaluation of site managers' hindrances towards optimal utilisation of construction resources. Journal of Engineering, Design and Technology, 12(3), pp. 348-363.

Emuze, F; Smallwood, J and Han, S (2014) Factors contributing to non-value adding activities in South African construction. Journal of Engineering, Design and Technology, 12(2), pp. 223-243. ISSN 1726-0531

Rajiv, P; Logesh, R; Vinodh, S and Rajanayagam, D (2014) Financial feasibility and value engineering principles integrated quality function deployment for a manufacturing organization: A case study. Journal of Engineering, Design and Technology, 12(1), pp. 71-88. ISSN 1726-0531

Aravindraj, S and Vinodh, S (2014) Forty criteria based agility assessment using scoring approach in an Indian relays manufacturing organization. Journal of Engineering, Design and Technology, 12(4), pp. 507-518.

Sun, Y; Djouani, K; van Wyk, B J; Wang, Z and Siarry, P (2014) Hypothesis testing-based adaptive PSO. Journal of Engineering, Design and Technology, 12(1), pp. 89-101. ISSN 1726-0531

Sharma, D K; Kaushik, B K and Sharma, R K (2014) Impact of driver size and interwire parasitics on crosstalk noise and delay. Journal of Engineering, Design and Technology, 12(4), pp. 475-490.

Cardoso, A F S P and Torkkeli, M (2014) Innovation in footwear companies: does it pay off? Journal of Engineering, Design and Technology, 12(1), pp. 128-154. ISSN 1726-0531

El-Medany, W M; Al-Omary, A; Al-Hakim, R and Nusaif, M (2014) Low cost real-time tracking system prototype using gm862 cellular quad band module. Journal of Engineering, Design and Technology, 12(3), pp. 389-407.

Deng, Y and Poon, S W (2014) Mega-event flagships in transformation: Learning from Expo 2010 Shanghai China. Journal of Engineering, Design and Technology, 12(4), pp. 440-460.

Ismaila, S O; Akanbi, O G and Ngassa, C N (2014) Models for estimating the anthropometric dimensions using standing height for furniture design. Journal of Engineering, Design and Technology, 12(3), pp. 336-347.

Katz, J I (2014) Quantifying "cliffs" in design space. Journal of Engineering, Design and Technology, 12(3), pp. 374-388.

Aderinlewo, O and Alade, G A (2014) Reliability-based analysis and design of steel frames with different supports. Journal of Engineering, Design and Technology, 12(1), pp. 39-52. ISSN 1726-0531

Adewunmi, O A; Ibem, E and Amole, D (2014) Satisfaction of first-time residential clients with architectural services. Journal of Engineering, Design and Technology, 12(3), pp. 316-335.

Lordsleem Jr, A C and Melhado, S B (2014) Scope of design for production of wall partitions. Journal of Engineering, Design and Technology, 12(2), pp. 263-279. ISSN 1726-0531

Abdessalem, J; Fakhreddine, D; Said, A and Mohamed, H (2014) Shape optimization for a hyperelastic axisymmetric structure. Journal of Engineering, Design and Technology, 12(2), pp. 177-194. ISSN 1726-0531

Folagbade, S O and Newlands, D M (2014) Suitability of cement combinations for carbonation resistance of structural concrete. Journal of Engineering, Design and Technology, 12(4), pp. 423-439.

Ding, Z; Ng, F and Wang, J (2014) Testing trust scale measurement invariance in project teams. Journal of Engineering, Design and Technology, 12(2), pp. 209-222. ISSN 1726-0531

Venter, I M; Blignaut, R J and Renaud, K (2014) Uniformity in the midst of diversity. Journal of Engineering, Design and Technology, 12(4), pp. 550-562.

Fernando, N G; Amaratunga, D and Haigh, R (2014) The career advancement of the professional women in the UK construction industry: The career success factors. Journal of Engineering, Design and Technology, 12(1), pp. 53-70. ISSN 1726-0531

Bala, K; Bustani, S A and Waziri, B S (2014) A computer-based cost prediction model for institutional building projects in Nigeria: An artificial neural network approach. Journal of Engineering, Design and Technology, 12(4), pp. 519-530.

El-Medany, W M (2014) A cost-effective programmable soc for network security using xilinx spartan 3an fpga. Journal of Engineering, Design and Technology, 12(2), pp. 280-291. ISSN 1726-0531

Agumba, J N and Haupt, T C (2014) The implementation of health and safety practices: Do demographic attributes matter? Journal of Engineering, Design and Technology, 12(4), pp. 530-550.

Othman, A A E (2014) A study of the competency requirements of property development graduates to meet the qualifications of the South African construction industry. Journal of Engineering, Design and Technology, 12(1), pp. 2-28. ISSN 1726-0531