Browse by Journal

Herbsman, Z J (1995) A+B bidding method: hidden success story for highway construction. Journal of Construction Engineering and Management, 121(4), pp. 430-437. ISSN 0733-9364

Smith, S D; Osborne, J R and Forde, M C (1995) Analysis of earth-moving systems using discrete-event simulation. Journal of Construction Engineering and Management, 121(4), pp. 388-396. ISSN 0733-9364

Hinze, J and Russell, D B (1995) Analysis of fatalities recorded by OSHA. Journal of Construction Engineering and Management, 121(2), pp. 209-214. ISSN 0733-9364

Diekmann, J E and Girard, M J (1995) Are contract disputes predictable? Journal of Construction Engineering and Management, 121(4), pp. 355-363. ISSN 0733-9364

Tiong, R L K (1995) Competitive advantage of equity in BOT tender. Journal of Construction Engineering and Management, 121(3), pp. 282-289. ISSN 0733-9364

Paulson, B C (1995) Computers and construction-midcareer reflections. Journal of Construction Engineering and Management, 121(2), pp. 197-200. ISSN 0733-9364

Hanlon, E J and Sanvido, V E (1995) Constructability information classification scheme. Journal of Construction Engineering and Management, 121(4), pp. 337-345. ISSN 0733-9364

Carty, G J (1995) Construction. Journal of Construction Engineering and Management, 121(3), pp. 319-328. ISSN 0733-9364

Boles, W W; Maxwell, D A; Scott, W D; Heermann, P D; Yarborough, T and Underwood, J (1995) Construction automation and robotics–pathway to implementation. Journal of Construction Engineering and Management, 121(1), pp. 143-152. ISSN 0733-9364

Kangari, R (1995) Construction documentation in arbitration. Journal of Construction Engineering and Management, 121(2), pp. 201-208. ISSN 0733-9364

Bashat, I M; Gab-Allah, A A and Amer, M I (1995) Construction of ameria caisson in Egypt. Journal of Construction Engineering and Management, 121(1), pp. 13-19. ISSN 0733-9364

Liu, L; Burns, S A and Feng, C W (1995) Construction time-cost trade-off analysis using LP/IP hybrid method. Journal of Construction Engineering and Management, 121(4), pp. 446-454. ISSN 0733-9364

Jeljeli, M N and Russell, J S (1995) Coping with uncertainty in environmental construction: Decision-analysis approach. Journal of Construction Engineering and Management, 121(4), pp. 370-380. ISSN 0733-9364

Fisher, D J; O'Neill, M W and Contreras, J C (1995) DS^2: Drilled shaft decision support system. Journal of Construction Engineering and Management, 121(1), pp. 86-94. ISSN 0733-9364

Dias, A and Ioannou, P G (1995) Debt capacity and optimal capital structure for privately financed infrastructure projects. Journal of Construction Engineering and Management, 121(4), pp. 404-414. ISSN 0733-9364

Hanna, A S and Senouci, A B (1995) Design optimization of concrete-slab forms. Journal of Construction Engineering and Management, 121(2), pp. 215-221. ISSN 0733-9364

Chang, L M and Hsie, M (1995) Developing acceptance-sampling methods for quality construction. Journal of Construction Engineering and Management, 121(2), pp. 246-253. ISSN 0733-9364

Navon, R (1995) Economic benefits of lightweight versus conventional construction methods. Journal of Construction Engineering and Management, 121(1), pp. 27-36. ISSN 0733-9364

Christian, J and Hachey, D (1995) Effects of delay times on production rates in construction. Journal of Construction Engineering and Management, 121(1), pp. 20-26. ISSN 0733-9364

Randolph Thomas, H; Smith, G R and Cummings, D J (1995) Enforcement of liquidated damages. Journal of Construction Engineering and Management, 121(4), pp. 459-463. ISSN 0733-9364

Crowley, L G and Hancher, D E (1995) Evaluation of competitive bids. Journal of Construction Engineering and Management, 121(2), pp. 238-245. ISSN 0733-9364

Hinze, J; Bren, D C and Piepho, N (1995) Experience modification rating as measure of safety performance. Journal of Construction Engineering and Management, 121(4), pp. 455-458. ISSN 0733-9364

Everett, J G and Thompson, W S (1995) Experience modification rating for workers' compensation insurance. Journal of Construction Engineering and Management, 121(1), pp. 66-79. ISSN 0733-9364

Huang, R Y and Halpin, D W (1995) Graphical-based method for transient evaluation of construction operations. Journal of Construction Engineering and Management, 121(2), pp. 222-229. ISSN 0733-9364

Sawhney, A and AbouRizk, S M (1995) HSM-simulation-based planning method for construction projects. Journal of Construction Engineering and Management, 121(3), pp. 297-303. ISSN 0733-9364

Randolph Thomas, H; Smith, G R and Cummings, D J (1995) Have I reached substantial completion? Journal of Construction Engineering and Management, 121(1), pp. 121-129. ISSN 0733-9364

Tiong, R L K (1995) Impact of financial package versus technical solution in a BOT tender. Journal of Construction Engineering and Management, 121(3), pp. 304-311. ISSN 0733-9364

Blackmon, R B and Gramopadhye, A K (1995) Improving construction safety by providing positive feedback on backup alarms. Journal of Construction Engineering and Management, 121(2), pp. 166-171. ISSN 0733-9364

Jaraiedi, M; Plummer, R W and Aber, M S (1995) Incentive/disincentive guidelines for highway construction contracts. Journal of Construction Engineering and Management, 121(1), pp. 112-120. ISSN 0733-9364

Kibert, C J and Coble, R J (1995) Integrating safety and environmental regulation of construction industry. Journal of Construction Engineering and Management, 121(1), pp. 95-99. ISSN 0733-9364

Maloney, W F and McFillen, J M (1995) Job characteristics: Union-nonunion differences. Journal of Construction Engineering and Management, 121(1), pp. 43-54. ISSN 0733-9364

Shaked, O and Warszawski, A (1995) Knowledge-based system for construction planning of high-rise buildings. Journal of Construction Engineering and Management, 121(2), pp. 172-182. ISSN 0733-9364

Senior, B A (1995) Late-time computation for task chains using discrete-event simulation. Journal of Construction Engineering and Management, 121(4), pp. 397-403. ISSN 0733-9364

Powderham, A J and Tamaro, G J (1995) Mansion House London: Risk assessment and protection. Journal of Construction Engineering and Management, 121(3), pp. 266-272. ISSN 0733-9364

Barras, G C and Mayo, R E (1995) Minidirectional drilling for installation of underground electrical conduit. Journal of Construction Engineering and Management, 121(4), pp. 364-369. ISSN 0733-9364

Chao, L C and Skibniewski, M J (1995) Neural network method of estimating construction technology acceptability. Journal of Construction Engineering and Management, 121(1), pp. 130-142. ISSN 0733-9364

Elzarka, H M and Bell, L C (1995) Object-oriented methodology for materials-management systems. Journal of Construction Engineering and Management, 121(4), pp. 438-445. ISSN 0733-9364

Riley, D R and Sanvido, V E (1995) Patterns of construction-space use in multistory buildings. Journal of Construction Engineering and Management, 121(4), pp. 464-473. ISSN 0733-9364

Garsden, B R (1995) Postconstruction evaluation. Journal of Construction Engineering and Management, 121(1), pp. 37-42. ISSN 0733-9364

Gibson, G E; Kaczmarowski, J H and Lore, H E (1995) Preproject-planning process for capital facilities. Journal of Construction Engineering and Management, 121(3), pp. 312-318. ISSN 0733-9364

Edward Back, W and Bell, L C (1995) Quantifying process benefits of electronic data management technologies. Journal of Construction Engineering and Management, 121(4), pp. 415-421. ISSN 0733-9364

Randolph Thomas, H and Napolitan, C L (1995) Quantitative effects of construction changes on labor productivity. Journal of Construction Engineering and Management, 121(3), pp. 290-296. ISSN 0733-9364

Jaselskis, E J; Anderson, M R; Jahren, C T; Rodriguez, Y and Njos, S (1995) Radio-frequency identification applications in construction industry. Journal of Construction Engineering and Management, 121(2), pp. 189-196. ISSN 0733-9364

Shapira, A (1995) Rational design of shoring-tower-based formwork. Journal of Construction Engineering and Management, 121(3), pp. 255-260. ISSN 0733-9364

Badger, W W and Mulligan, D E (1995) Rationale and benefits associated with international alliances. Journal of Construction Engineering and Management, 121(1), pp. 100-111. ISSN 0733-9364

Beliveau, Y J; Michael Williams, J; Gerald King, M and Niles, A R (1995) Real-time position measurement integrated with CAD: Technologies and their protocols. Journal of Construction Engineering and Management, 121(4), pp. 346-354. ISSN 0733-9364

Mayo, R E and Liu, G (1995) Reform agenda of Chinese construction industry. Journal of Construction Engineering and Management, 121(1), pp. 80-85. ISSN 0733-9364

Crowley, L G and Hancher, D E (1995) Risk assessment of competitive procurement. Journal of Construction Engineering and Management, 121(2), pp. 230-237. ISSN 0733-9364

Kangari, R (1995) Risk management perceptions and trends of U.S. Construction. Journal of Construction Engineering and Management, 121(4), pp. 422-429. ISSN 0733-9364

Tiong, R L K (1995) Risks and guarantees in BOT tender. Journal of Construction Engineering and Management, 121(2), pp. 183-188. ISSN 0733-9364

Varghese, K and O'Connor, J T (1995) Routing large vehicles on industrial construction sites. Journal of Construction Engineering and Management, 121(1), pp. 1-12. ISSN 0733-9364

Ed Koehn, E; Kothari, R K and Pan, C S (1995) Safety in developing countries: Professional and bureaucratic problems. Journal of Construction Engineering and Management, 121(3), pp. 261-265. ISSN 0733-9364

Herbsman, Z J; Chen, W T and Epstein, W C (1995) Time is money: Innovative contracting methods in highway construction. Journal of Construction Engineering and Management, 121(3), pp. 273-281. ISSN 0733-9364

Randolph Thomas, H; Smith, G R and Wirsching, S M (1995) Understanding defective specifications. Journal of Construction Engineering and Management, 121(1), pp. 55-65. ISSN 0733-9364

Kim, J J and William Ibbs, C (1995) Work-package-process model for piping construction. Journal of Construction Engineering and Management, 121(4), pp. 381-387. ISSN 0733-9364